Amazing Clear Cast Plus

(40) Write a Review

Amazing Clear Cast Plus epoxy provides the same great features of our Amazing Clear Cast including an easy to use 1:1 mix ratio by volume, a brilliant high-gloss durable surface, and is FDA compliant; but now brings the added benefit of industry-leading UV resistance.

  • Can be colored with Alumilite dyes, alcoholic inks, or other non-water based colorants
  • Compliant with FDA 21 CFR 175.300
  • Epoxies in their unmixed state will naturally yellow with time
  • This product has a longer cure schedule than regular Amazing Clear Cast

WARNING: Cancer and Reproductive Harm -

Prior to using product, please read all Technical Data, Safety Data, and Instruction sheets linked below.

16 oz. Kit = 8 oz. A + 8oz. B

32 oz. Kit = 16oz. A + 16oz. B

1 gal. Kit = .5 gal. A + .5 gal. B

2 gal. Kit = 1 gal. A + 1 gal. B

$30.99 - $192.99
Adding to cart… category.add_cart_announcement

Technical Specifications

Amazing Clear Cast Plus
Mix Ratio:
1:1 by volume
Pot Life:
30-40 minutes
Demold Time (100 gram mass):
24-48 hours
Mixed Viscosity (cps):
Specific Gravity:
Shore Hardness (ASTM D2240):
75-77 D
Shrinkage (in./in.):
Tensile Strength (ASTM D-638, psi):
Elongation (in./in.):
Heat Resistance:
400º F
Heat Deflection Temperature:
100º F
FDA Compliant:

More Information

Prior to using product, please read all Technical Data, Safety Data, and Instruction sheets linked below.

Surface Coating Calculator

See It In Use


  • 3
    Takes longer to cure

    Posted by Seve on Jan 29th 2021

    Takes too long to cure, I wont use it again.

  • 5
    Amazing clear cast plus

    Posted by Stanley Anderson on Jan 13th 2021

    Well pleased with this product. Seems to take a little longer to harden but that could be to the colder weather we are having here in South MS. So far no issues such as cracking or bubbles. Cuts like butter and sands nicely. Polishes real well. Have used it on 5 projects so far and well pleased. Will order again.

  • 5
    My New Go To Resin

    Posted by Nicole (Fairies And Fancies) on Dec 8th 2020

    This resin has a lower viscosity, which is great for less bubbles. If you need your resin a thicker consistency simply mix the resin and let it sit until it's the consistency you like. MIX WELL. A lot of issues people run into with resin is from not stirring slowly and not stirring for long enough. The cure time is longer, but my open work time is longer, my pieces have less bubbles and finished pieces are less brittle and very strong. I've used this resin for casting things 2mm thick and up and have had great results. Keep in mind thicker pieces cure faster than super thin ones. The price is also very reasonable for the quality of product compared to other resins I've tried.

  • 2
    Amazing clear cast plus

    Posted by Andrew Heicher on Dec 2nd 2020

    Set and cure time to long. Seven days or longer to get full set. Two days before you can remove frome mold. You have to follow the directions to the print to even get it to work right. that means mixing for a long time. And you will need lots of mold release.

  • 2
    Not a fan

    Posted by Jamie Klimekoski on Oct 29th 2020

    I usually use normal clear cast. I thought id try this because of the less yellowing. I’m not a fan at all. It definitely takes longer to try which I don’t have time’s feels rubbery. I’m just going to have to go back to the original but I guess it was worth a try. Next time I won’t buy a gallon when I’m trying something new but I didn’t think it would be that much if a difference

  • 2
    Drying time sucks

    Posted by Jennifer Burdette on Oct 25th 2020

    I make custom tumblers, going on 2 years. I only use alumilite. So I saw the plus version and said oooo! I must try. I buy 2 gallons at a time. With the regular version I could hand cups after about 7 hours, still a tiny tacky, but enough to move off turners and start next cups....this stuff is still to tacky to even attempt to touch after 10 hours!!!! It sucks...and will never buy this version again. If you are pressed for time, go with the original, not the UV plus.

  • 1

    Posted by Sonya on Oct 21st 2020

    I would never purchase this product again it is definitely not meant for southern climates/temperatures. Curing process never completes. I used it again in the fall when the temperatures were not as warm and the curing did occur however it took a few days. what I was able to find out is it became soft and bent when the temperature was warmer. Wasted time and money. So disappointed.

  • 1
    Amazing +Plus

    Posted by Unknown on Oct 19th 2020

    Does not dry well compared to the regular kind.

  • 1
    Amazing clear cast plus

    Posted by Katy Dunagan on Oct 12th 2020

    I do not like thos new product at all. It is not flowing on my tumblers like the regular amazing clear cast does. I've mixed it the correct way a 1:1 ratio and it's just not working. I'm so disappointed. I highly recommend started out with a small bottle when trying this. I bought the 2 gallon and what a waste. I will be buying the amazing clear cast from now on!