Amazing Mold Maker
Amazing Mold Maker is an easy-to-use platinum-based silicone mold-making material that demolds in 30 minutes and picks up intricate details. Amazing Mold Maker is ideal for highly-detailed, fast-curing molds and is FDA compliant!
Ideal for making custom molds for casting with epoxy, resin, concrete, candles, soaps, chocolate, and more!
- 1:1 mix ratio and low viscosity makes for easy mixing
- Flexible for demolding more intricate pieces
- Good tear strength means great durability and mold life
- FDA Compliant for use with food applications
- Demolds in as soon as 30 minutes*
- Full cure in 24 hours*
*Demold/Cure based on 75F material and ambient temperature
Prior to using product, please read all Technical Data, Safety Data, and Instruction sheets linked below.
16 fl.oz. - 8 fl.oz A side / 8 fl.oz. B side
64 fl.oz. - 32 fl.oz A side / 32 fl.oz B side
1 gal - .5 gal A side / .5 gal B side
- Amazing Mold Maker
- Opaque Red
- Mix Ratio:
- 1:1 by volume
- Pot Life (100 gram mass at 75º F):
- 6-8 minutes
- Demold Time (100 gram mass at 75º F):
- 30 minutes
- Mixed Viscosity (cps) at 130º F:
- Specific Gravity:
- Shore Hardness (ASTM D2240):
- 20 A
- Linear Shrinkage:
- Die B Tear Strength (pli):
- Die T Tear Strength (pli):
- Tensile Strength (ASTM D638, psi):
- Elongation (in./in.):
- Temperature Resistance:
- -67º to 395º F
- FDA Compliant?:
I have bought several of these containers in HL, and the quality is great, so I decided to purchase the larger gallons online. I find this silicone/mixture does not damage when using my normal process of pouring and using heat guns etc (no pieces sticking to the resin, chunks of the mold coming apart etc). I've had to replace so many mold because of this, but, I feel I will be saving money now that I started using this mold maker.
Worked as advertised. We wanted to recreate a concrete column cap with a unique profile that is 26 1/2" x 26 1/2" x 6 1/2" thick. We built a plywood box around the cap 1 1/2" bigger on all sides and used a total of 12 gallons. The epoxy bonds very well to itself as we only bought 8 gallons to start and ran short, then had to order another 4 gallons to pour on a couple days later. The mold didn't leave anything behind on the concrete cap when we stripped it and worked perfectly for pouring the new caps. Highly recommended.
I have been working with Silicone for many years. Amazing Mold Maker: Easy to measure, mix, & pour!! The finished product is phenomenal & was able to cast the smallest intricate details. The density of the finished product holds up very well. From my experience, one finished mold should last quite a while with proper care. Please note: If you cast a lot of molds at one time, you will need the larger bottles & more than one kit. Customer Support: They are very kind, & will gladly answer any questions you may have. Shipping: Fast, easy, affordable, & my packages came without damage.
Fast & easy the best mold maker I have used. I highly recommend it!
This is the first silicone I have worked with. I made my own DIY molds and they came out great! No bubbles and ready to demold in 30 minutes! I'm excited to test this silicone out with professional blanks and housing. I'm sure it'll come out 'amazing'!!!