null

Amazing Deep Pour

(15 reviews) Write a Review

Amazing Deep Pour is a 2-part, extremely clear, deep-cast epoxy. It is ideal for applications requiring thicker pours (up to 2 inches thick) or a glass-like finish.

This 2:1 mix ratio product was formulated to reduce exotherm (heat build-up), allowing users to pour thicker sections without the delays of layering as with standard epoxies. Amazing Deep Pour is compatible with Alumilite Dyes and Polycolor Resin Powders, Glow Powders, and Glitters. Other colorants may be compatible, testing is required.

Amazing Deep Pour is ideal for river tables, resin blanks for lathe turning, filling wide gaps in wood, or any application requiring a depth greater than 3/8 inch. ADP can also be layered for projects requiring thicknesses beyond 2 inches.

  • 2:1 (2 parts A to 1 part B) by volume
  • Low exotherm
  • Low viscosity for easy mixing
  • Long open time to allow for air bubble release
  • 24-72 hour tack-free time (mass and temperature are factors)
  • 5-7 day full cure
  • Compliant with FDA 21 CFR 175.300

Prior to using product, please read all Technical Data, Safety Data, and Instruction sheets linked below.

24 oz. Kit = 16 oz. A + 8oz. B

1.5 gal. Kit = 1 gal. A + .5 gal. B 

3 gal. Kit = 2 gal. A + 1 gal. B

6 gal. Kit = 4 gal. A + 2 gal. B

$44.80
Minimum Purchase:
1 unit
Maximum Purchase:
3 units

Technical Specifications

Product:
Amazing Deep Pour
Color:
Clear
Mix Ratio:
2A:1B by volume
Open Time:
60-90 minutes
Demold Time:
24-72 hours
Full Cure:
5-7 days
Mixed Viscosity (cps):
450
Specific Gravity:
1.05
Shore Hardness (ASTM D2240):
77-80 D
Izod Impact (ASTM D-256, lb/in):
50
Tensile Strength (ASTM D-638, psi):
7,500
Elongation (in./in.):
5-6%
Heat Resistance:
400+ ºF
Heat Deflection Temperature:
108 ºF
FDA Compliant:
Yes

More Information

Safety Data Sheet

Technical Data Sheet

Deep Pour Calculator

See It In Use

Reviews

  • 3
    Amazing Deep Pour

    Posted by Elling Hoem on Nov 29th 2021

    I have been using Alumilite Resins exclusively since I started resin casting two years ago. At first I mostly used a pressure pot with GREAT results, but a last year stared doing “river table style” charcuterie trays, cribbage boards and lazy Susan’s. At first I used Clear cast and poured 3/4” to 1’deep and had no problems, but when I reordered I decided to try Deep Pour. In my shop I turn, sand and finish all my projects, so I was thrown when finding deep pour takes THREE days to dry before demolding. That means I have to “close up shop” and wait for my project to dry enough to de-mold. So I built a insulated 24” cubed shaped box with a light to cover and keep the heat regulated and dust out. Since the long cure time I have not been able to “finish” any of the five castings yet and am anxious to see how the deep pour resin finishes. The learning curve is certainly much longer than expected as to how long to wait, before the last “stir” to get the pattern(s) I am trying to achieve. The YouTube video put out by Alumilite say 8-9 hours, but the last time I tried that the center was too “cured” and it ruined the piece. I will revisit my review after I actually finish a couple projects. As I mentioned in the beginning, I am exclusively using Alumilite products and hoping the problems I am having with Deep Pour can be solved soon.

  • 5
    Best Deep pour out there

    Posted by Pete on Mar 20th 2021

    I’ve used many brands, but Alumilite is hands down the best deep pour out there for river tables. It’s super easy to work with and comes our without blemish. And a side bonus is that there is no obnoxious odor like many of the other brands.

  • 5
    amazing deep pour

    Posted by clem steubing on Mar 8th 2021

    its a good product but full 7 day cure in low tempetures

  • 3
    the ability to turn a fully cured deep pour bottle stopper

    Posted by Marcus Boyd III on Feb 27th 2021

    I really like Deep Pour for my river table tops did three. However I have cast many bottle stoppers with Deep Pour and they will NOT turn without chipping if I let them to fully cure. If I try to turn them after two or three days they will turn without chipping. I have cast many stoppers with Amazing Clear cast and never had a problem no matter how old they were. I would like to know if anyone has had similar problems.

  • 5
    Amazing product

    Posted by John Marshall on Dec 16th 2020

    Easy to mix and handle. Sets very clear especially if placed in a pressure pot.

  • 5
    The alumilite deep pour is an awesome product, simply the best qaulity resin I've ever used. I would recommend this product to every maker out there!

    Posted by Josh Copeland on Dec 10th 2020

    There's nothing else out there like this crystal clear product! Simply mix your dyes or pigments, pour, eliminate any bubbles or the open time will take care of it itself. Then simply wait for the curing process to finish. Once curing times up its time to sit back and observe the awesomeness that awaits!

  • 5
    Deep pour

    Posted by Jake Thompson on Dec 9th 2020

    I poured a 2 inch thick pour my first time using this.. it turned out crystal clear! No bubbles, no flaws. I can’t wait to do a table with this stuff.

  • 5
    Deep pour

    Posted by Jacob Murphy on Dec 9th 2020

    Amazing product. The product is bubble free and crystal clear once cured. I actually had to check my mod for jeans before I realized the deep pour had cured. Highly recommend this product

  • 5
    Deep Pour

    Posted by Whiskey Run Customs on Dec 8th 2020

    Absolutely amazing, made my 2" pour on my river coffee table. Within a few mi minutes all the bubbles from mixing were at the top. A quick run with the torch and it was crystal clear. I just got 6 more gallons in for two more coffee tables. I highly recommend this product. Wesley Hutchinson Whiskey Run Customs