Dyes, Filler & Mold Release

Alumilite Dye

Alumilite Dyes allow users to color any of Alumilite's high quality resins evenly and completely with a reacting dye that will never leach.
Buy Now

Alumidust

Use Alumidust powders in combination with Alumilite casting resins or Alumisol to achieve beautiful effects in your casting project.
Buy Now

Alumilite Metallic Powder

Create beautiful metallic looking cast pieces using Gold or Copper powders. Simply brush the powder in your silicone rubber mold and cast your piece. Pearlescent powder can be added to clear resins in combination with Alumilite Dyes to produce a dynamic pearlized color.
Buy Now

Phosphorescent Powder

Want your cast piece to glow in the dark? It can with Alumilite's New Phosphorescent Powder. Simply add the powder to Alumilite Clear resins, Alumisol, or paint to achieve extremely bright glow in the dark cast pieces.
Buy Now

Microballoons

Add volume and buoyancy to your cast part. If you are looking to make your part lighter, have it float in water, or to use significantly less resin try using the Microballoons.
Buy Now

Porcelain Powder

Create beautiful cold cast porcelain by adding actual porcelain powder to Alumilite White or Alumilite Clear.
Buy Now

Silicone Color Pigments

Polytek® Color Pigments allow users to add color to Alumilite platinum and tin based silicone rubbers. Add up to 0.5% of the total mixed weight of the silicone mix. Add to Part B before mixing with Part A with all 1:1 systems. Add to Part A on all 10:1 systems. Available in fleshtone, white, red, blue, green, yellow and black.
Buy Now

Tungsten

Use tungsten powder to significantly increase the weight and overall density of your Alumilite resin and Alumisol castings.
Buy Now

Copic Airbrush System
Copic Markers

Copic Classic Markers used with Copic Airbrush System.
Buy Now

Copic Refills

Copic paint refills used to refill Classic Markers
Buy Now

Releases
UMR

Release resin from rubber, rubber from rubber, and resin from resin.
Buy Now

Rubber to Rubber Mold Release

Release silicone rubber from silicone rubber easily and effectively by applying a couple coats of Rubber to Rubber Mold Release.
Buy Now

Stoner Mold Release

Stoner Mold Release is used to prolong the life of your molds and to aid in the ease of releasing your cast urethane parts. Stoner was formulated specifically for urethanes and is the ideal choice when casting urethane into a urethane mold.
Aerosol cans cannot be shipped air, only ground!
Buy Now

Silicone Oil

Add Silicone Oil when mixing your RTV silicone rubber to provide slightly better release properties, to lower the silicone's durometer, and also lower the viscosity.
Buy Now