Alumilite's QuickSet silicone mold making rubber is one of our most easy to use silicones. It is great for making simple one and two piece molds that does not require extreme stress or flexibility. Its low viscosity gives you excellent detail reproductions of your original without requiring vacuum degassing (always recommended if available). The QuickSet is a tin base silicone. Temperature and humidity may affect the work and cure speed of the rubber. The QuickSet cures against all different types of clays including sulfur based with any problems of inhibition. The QuickSet is a great general purpose rubber for making 2 piece molds that need good alignment to one another. QuickSet exhibits good overall dielectric properties for electronic applications.

Prior to use, read all Technical Data Sheets/Instructions and Safety Data Sheets linked below.

Price: $27.50
Availability: In Stock
Usually ships In 1-2 Business Days
    Choose a size below:
    • QuickSet 5lb.
    • QuickSet 10 lb.

    Note: Alumilite products also available in bulk sizes ... 5 gallons, drums, and totes. Call 800-447-9344

    Product QuickSet
    Color Tan
    Mix Ratio (wt. or Vol.) 10:1 by wt.
    Open Time 30 Minutes
    Demold Time (100 gr. Mass) 8-18 Hours
    Mixed Viscosity (cps.) 13,000
    Specific Gravity 1.15
    Shore A Hardness  40-50 A
    Linear Shrink % .0025 
    Tensile Strength  (psi) 400
    Tear Strength (ppi) 20

    Elongation (in./in.)


    Temperature Resistance (F) -67 to 395
    Vacuum Required No
    You May Also Like: