Alumilite’s Replicator 400 provides users with an excellent multi-purpose filled urethane casting system that is extremely user friendly. The Replicator 400 is great for nests, fixtures, vacuum form tools, and thermo form tooling. The cured cast pieces can be easily machined and polished. The Replicator 400 is easy to use and has a mix ratio of 1:1 by weight. The fillers do settle over time and need to be agitated prior to measuring. Once mixed, poured, and cured, the Replicator 400 gives you an incredibly tough tooling resin that is great for a wide variety of industrial applications. The material features a 6 minute work time with a demold time that ranges from 2-3 hours depending on the mass of the material being cast. The Replicator 400 contains no solvents which make it a great choice when pouring against polystyrene. The material also features minimal shrink and is fire retardant.


Prior to use, read all Technical Data Sheets/Instructions and Safety Data Sheets linked below.

Price: $20.75
Availability: In Stock
Usually ships In 1-2 Business Days
    Choose a size below:

    Note: Alumilite products also available in bulk sizes ... 5 gallons, drums, and totes. Call 800-447-9344


    Quantity:
    Product Replicator 400
    Color Green
    Mix Ratio 1:1 by WEIGHT
    Pot Life (100g mass @ 75 degrees F) 6-8 minutes
    Demold Time (100g mass @ 75 degrees F) 2-3 hours
    Mixed Viscosity (cps.) 1,800
    Specific Gravity 1.65
    Shore Hardness (ASTM D-2240) 80 D
    Shrinkage (in./in.) .0007
    Tensile Strength (ASTM D-638) (psi) 4,200
    Elongation (in./in.) <2%
    Temperature Resistance 200 F
    Flex Modulus (psi)—Tear (pli) n/a
    Approx Net Volume 1.5 gal
    You May Also Like: