Learn

Alumilite White (also known and sold as Amazing Casting Resin) is an easy to use white urethane resin.

Alumilite Clear is a glossy, crystal clear resin that is convenient to use for a wide range of casting and turning projects.

Alumilite Clear Slow is a crystal-clear resin with a longer (twelve-minute) open time, making it convenient to use for large casting and turning projects.

Alumilite Clear is a glossy, crystal clear resin that is convenient to use for a wide range of casting and turning projects.

Alumires (RC-3) Black is our original AlumiRes that has been pre-dyed black. It is an easy to mix and pour resin that is great for casting large, durable pieces.

Alumires (RC-3) is an easy to mix and pour resin that is great for casting large, durable pieces.

Alumilite Clear is a glossy, crystal clear resin that is convenient to use for a wide range of casting and turning projects.Performance 65D is a rigid yet flexible urethane elastomer

Performance 80D is a urethane elastomer that produces tough parts with ultra-high tear and impact properties.

Slow Set 7 is a urethane casting resin with a long open time – it cures tan and rigid, and is perfect for casting large, intricate pieces.

Flex 20 is a soft, flexible yet durable urethane rubber. It’s easy to use, accepts color, and allows for excellent detail and part reproduction.

Flex 50 is a low-viscosity, tough, and flexible urethane rubber that allows for great detail and part reproduction.

Flex 60 is a tough urethane rubber with flexibility -- excellent for duplicating rubber parts or for making rubber molds.

Flex 70 is flexible, tough urethane rubber that is excellent for duplicating rubber parts or for making rubber molds.

Flex 80 is an extremely tough yet still flexible urethane rubber that is a great product for duplicating or casting hard rubber parts.

610 Foam is a 2-part foam that cures rigid and lightweight that expands up to ten times its original volume.

AlumiFoam is a rigid 2-part foam that produces a hard, dense, and durably cast piece.

This two-part foam is an expanding, flexible, and high tear strength product. Flexible Foam expands to 3-5 times its original volume and remains soft.

Super Foam 320 is a user-friendly, 2-part expandable foam that expands up to 20 times its original liquid volume.

Learn how to properly combine our resins

Learn how to minimize air bubbles in your resin

Use powders to add color and depth to your pour

Using dyes to add a pop of color

Learn how you can create a mold box

Learn how to properly mix silicone

Learn how to properly degas silicone

Learn how to properly create one piece molds

Learn how to properly create two piece molds

The complete line of Amazing Mold Making products.

Amazing Mold Putty is an extremely easy to use 2-part silicone mold making putty.

Amazing Mold Rubber is an easy to use tin-based silicone mold-making material.

Amazing Remelt is a mold making material that is reusable and non-toxic.

A tin-based silicone mold making rubber, when your mold requires a little more stiffness but still need exceptional tear strength.

High Strength 2 is a tin-based silicone mold making rubber with high tear strength and is great for making all types of molds.

High Strength 3 is our most flexible tin-based silicone mold making rubber.

Learn what Plat silicone rubber is right for your project.

Plat 10 is a platinum-based silicone mold making rubber that cures extremely soft and pliable.

Plat 25 is a platinum-based silicone mold making rubber than when cured yields a soft and pliable rubber while maintaining the mold’s structural properties.

Plat 40 is a platinum-based silicone mold making rubber that cures flexible and with medium hardness.

Plat 55 is a platinum-based silicone mold making rubber that is perfect for making stiff, stable molds.

Mold Putty is a food-safe, easy to use, two-part silicone putty that allows you to make a flexible rubber mold in just ten minutes.

Mold Putty 15 is a two-part silicone mold making putty with a long open time that allows you to create larger-scaled projects.

Quickset is a tin-based mold making silicone that is ideal for one- or two-piece molds that don’t require a lot of stress or flexibility.

Trans 40 is a translucent, platinum-based silicone rubber that is ideal for molds that require visual inspection or for creating prototype designs.