Alumilite's High Strength 2 silicone mold making rubber has an extremely high tear strength and is great for making almost any kind of mold. The High Strength 2 is a 20-25 A shore hardness which means it is soft enough to use for parts with undercuts but still has enough stiffness to effectively make multiple piece molds and maintain good alignment. The High Strength 2 is a tin base silicone and cures against all different types of clay and substrate. The tin base silicone is a condensation cure and therefore temperature and humidity may affect the cure speed of the rubber. The High Strength 2 has a low viscosity which does not require degassing (always recommended when available) and will pick up the exact detail of your original.  Use Alumilite's Rubber to Rubber mold release or petroleum jelly when making 2-piece molds when using the High Strength 2 rubber due to it's extremely high tear strength.


Prior to use, read all Technical Data Sheets/Instructions and Safety Data Sheets linked below.

Price: $27.50
Availability: In Stock
Usually ships In 1-2 Business Days
    Choose a size below:

    Note: Alumilite products also available in bulk sizes ... 5 gallons, drums, and totes. Call 800-447-9344


    Quantity:
    Product

    Alumilite's High Strength 2

    Color Pink
    Mix Ratio  10:1 by WEIGHT
    Open Time 45 mins
    Demold Time 12-18 hours
    Mixed Viscosity (cps.) 18,000
    Specific Gravity 1.15
    Shore A Hardness  20-23
    Linear Shrink (%) .3
    Tear Strength (ppi) 145
    Tensile Strength (psi) 550
    Elongation  500%
    Temperature Resistance (F) -67 to 395
    Vacuum Required No
    You May Also Like: